General Pipe Cleaners I-95 General Wire I-95 Sectional Machine Without Cable
GENERAL PIPE CLEANERS SECTIONAL MACHINE (NO CABLE) HERE'S A SECTIONAL CABLE MACHINE THAT DRIVES 7/8" AND 5/8" SECTIONS - OR EVEN 5/16" CABLES FOR SMALL DRAIN WORK. YOU SWITCH FROM 7/8" TO 5/8" AND BACK BY REPOSITIONING THE CHUCK CONE. NO ADAPTER REQUIRED. ATTACH A SMALL DRUM TO THE BACK OF THE MACHINE TO DRIVE SMALLER CABLES. THE I-95 GIVES YOU POWER AND CONVENIENCE. THE MOTOR IS A 1/3 HP CAPACITOR TYPE, SO IT DELIVERS PLENTY OF TORQUE TO THE CABLES. YET, AS SOON AS YOU LIFT THE DRIVE HANDLE, THE CABLE STOPS ROTATING, SO THERE'S NO ADDITIONAL TORQUE BUILD UP. YOU ALSO USE THE DRIVE HANDLE TO CARRY THE MACHINE. AND WHEN IT'S IN POSITION ON THE JOB, ITS FOUR POINT BASE GIVES IT ROCK-SOLID STABILITY. A CUTTER HOLDER IS ATTACHED TO THE BACK OF THE I-95, SO YOUR CUTTING HEADS ARE ALWAYS WITH THE MACHINE. A GROUND FAULT CIRCUIT INTERRUPTER IS STANDARD EQUIPMENT. CLEAR 1-1/2" - 2" LINES WITH 5/16" X 25' CABLE. CLEAR 2" - 3" LINES UP TO 125 FEET LONG WITH 5/8" X 7-1/2' SECTIONS, OR 4" LINES UP TO 150 FEET LONG WITH 7/8" X 15' SECTIONS.
Priced unit of measure: Each not Pack
Minimum/Multiple for Order: 1
Restricted Sales States:
